Working PressureMaterials
From 1/2"DN15 up to 4"DN100
150PSI@73°F
PN10BAR@22°C
Body: PE+Fiber Glass
Gasket: THERMOPLASTIC
Standards
Thread: NPT, NPS, BSPT, BSP

Suitable for all water tanks.


Double nuts design for heavy duty application.


Installation information

  1. Please make sure the tank wall hole equal to the connector or up to 1/32" larger than the nominal body. If exceeding the size, the O-ring may not be sealed properly.
  2. Make sure the O-ring sealing surface is smooth with no deep scratches or burrs.
  3. When tightening nut, the O-ring seal should be in contact with the tank wall.
  4. Hand-tighten only, over strengthen may cause damage to the product.
  5. Approximate tighten units is as follows:
  6. NOMINAL PIPE SIZETIGHTEN UNIT
    1/2"2/3 of a turn
    3/4" ~ 2-1/2"1/2 of a turn
    3" ~ 4"1/3 of a turn

Tank Connector LD Taiwan

  • Rs. 1,250

Available Options