Working PressureMaterialsFrom 1/2"DN15 up to 4"DN100 150PSI@73°F PN10BAR@22°CBody: PE+Fiber Glass Gasket: THERMOPLASTICStandardsThread: NPT, NPS, BSPT, BSPSuitable for all water tanks.
Double nuts design for heavy duty application.
Installation information
Please make sure the tank wall hole equal to the connector or up to 1/32" larger than the nominal body. If exceeding the size, the O-ring may not be sealed properly.
Make sure the O-ring sealing surface is smooth with no deep scratches or burrs.
When tightening nut, the O-ring seal should be in contact with the tank wall.
Hand-tighten only, over strengthen may cause damage to the product.
Approximate tighten units is as follows:
NOMINAL PIPE SIZETIGHTEN UNIT1/2"2/3 of a turn3/4" ~ 2-1/2"1/2 of a turn3" ~ 4"1/3 of a turn